Foresight GC Quad

We use the Foresight GC Quad launch monitor which incorporates the latest technology used for fitting, instruction, and club building throughout the entire golf industry. The GC Quad is used to take the guesswork out of fitting by using exact measurements of ball speed, backspin, sidespin, bend, horizontal launch angle and side angle. In addition, The Foresight GC Quad system which uses stereoscopic cameras to deliver incredibly accurate measurements of the club head velocity, swing path, attack angle, club face angle, dynamic loft and lie at impact, smash factor and even impact position on the club face. With the GC Quad you finally have a
solution that delivers the player's full range of performance from club head
 to ball performance.

Individual Fitting Information

Driver / Fairway Fittings

Every golfer wants to drive the golf ball longer and straighter. The goal for Kepler’s golf fitters is to get the perfect driver head with the correct shaft, along with the proper specifications. Your new driver will give more confidence off the tee.

Our fitting process:

  • Interview and ask questions of our customers throughout the fitting process regarding their golf game, existing clubs, physical abilities/disabilities and goals for their golf game.
  • Evaluate your current drivers specifications -head( Size, loft, face angle and weight distribution),  shaft (weight, flex/frequency, flex point, torque and length) and grip(size, material and weight)
  • Measurement of customer’s static sizing: height, wrist to floor measurement, overall hand size and finger length. This information will begin to assist us in identifying the proper length  and grip size for the customer
  • We will us a high tech launch monitor to evaluate the performance of our customer’s existing club to gather necessary data (ball speed, club speed, launch angle, back spin, side spin and direction) to determine what changes need to be made to enhance the performance of their own driver or to select the best new driver with the best shaft.
  • With the information gathered we will select shafts and heads for our customers to use on the launch monitor to help improve the data on the launch monitor to increase the customer’s accuracy and distance.  This information will include the appropriate shaft weight, flex, flex-point, torque ratio, shaft construction, length, head type, face angle, weight distribution and loft. We will continue to evaluate different club and shaft options until the best club configuration is achieved
  • Once we have the best results from the launch monitor we will finalize all of the specifications, Kepler’s Golf offers and works closely with all of the current club manufacturers (Ping, Taylor Made, Callaway, Cleveland, Cobra, Mizuno, PXG, Tour Edge, Wilson and More!) to have your club built to the proper specifications. In many cases we will use our club building expertise and our large selection of shafts to build your club.  Call Kepler’s Golf at 925-932-8179 to make an appointment for your custom driver fitting, to help improve your game today!


Iron/Hybrid Fitting

Consistent results are what you are looking for in your irons, the distance should be spaced equally from long irons to short irons. At Kepler’s Golf we will make sure we optimize your accuracy, launch, speed, distance control and spin with your irons.

Our Fitting Process:

  • Interview and ask questions of our customers throughout the fitting process regarding their golf game, existing clubs, physical abilities/disabilities and goals for their golf game.
  • Evaluate your current iron/hybrid specifications -head( Size, loft, lie, face angle, material and weight distribution),  shaft (weight, flex/frequency, flex point, torque and length) and grip(size, material and weight)
  • Measurement of customer’s static sizing: height, wrist to floor measurement, overall hand size and finger length. This information will begin to assist us in identifying the proper length  and grip size for the customer
  • Kepler’s Golf will employ swing analysis programs to help us determine where to begin with identifying the best shaft for our customers swings
  • We will us a high tech launch monitor to evaluate the performance of our customer’s existing club to gather necessary data (ball speed, club speed, launch angle, decent angle, back spin, side spin and direction) to determine what changes need to be made to enhance the performance of their own irons or to select the best new iron with the best shaft.
  • With the information gathered we will select shafts and heads for our customers to use on the launch monitor to help improve the data on the launch monitor to increase the customer’s accuracy and distance.  This information will include the appropriate shaft weight, flex, flex-point, torque ratio, shaft construction, length, head type, face angle, weight distribution, loft and lie. We will continue to evaluate different club and shaft options until the best club configuration is achieved
  • Once we have the best results from the launch monitor we will finalize all of the specifications, Kepler’s Golf offers and works closely with all of the current club manufacturers (Ping, Taylor Made, Callaway, Cleveland, Cobra, Mizuno, Tour Edge, PXG, Wilson and More!) to have your club built to the proper specifications. In many cases we will use our club building expertise and our large selection of shafts to build your clubs. Call Kepler’s Golf at 925-932-8179 to schedule an appointment for your custom iron/hybrid fitting to hit it straighter and help you lower your scores!


Beginner Club Fittings

Yes even beginners need to be fit for golf clubs! Maybe not to the full extent of some more experienced golfers, but to have clubs that fit will make your golf more enjoyable.

  • Our fitters will talk with the new golfer about any physical issues they may have,  also discuss the goals of the new golfer and what commitment they have to the game
  • We will determine the proper club length, Lie angles, Club lofts, stiffness of shafts, shaft material, grip material and grip size
  • Also help the beginning golfer set up the combination of clubs in their new golf club set
  • With the right specification on the clubs it will help the beginner improve at a faster rate which will make your golfing experience for fun
  • Once we have finalized all of the specifications, Kepler’s Golf offers and works closely with all of the current club manufacturers (Ping, Taylor Made, Callaway, Cleveland, Cobra, Mizuno,  Tour Edge, PXG, Wilson and More!) to have your club built to the proper specifications. Call Kepler’s Golf at 925-932-8179 to schedule an appointment for your first fitting to create a great golf experience! We look forward to helping beginners!

 

Available at Kepler's Golf Repair

SST PURE® Golf Shaft Alignment and Analysis

Golf shaft irregularities often result in missed shots as a result of the shaft, not your swing. The patented and USGA-approved SST PURE® process of club assembly uses computer analysis to locate each shaft's irregularities and determine the most stable orientation of that shaft. It aligns the shaft to neutralize the irregularities, so that each club bends in the direction it should - straight down the target line.

Problem:
All golf shafts contain structural irregularities that can cause off-line bending and twisting during your golf swing.

Solution:
SST PURE® Shaft Alignment uses computer analysis to determine the most stable orientation of any shaft, negating the effect of shaft irregularities and making every club perform like your favorite.

 

Frequency Matching

Frequency matching measures and defines a shaft's flex through electronic calibration so the shaft flexes and deals the same with every swing. Every company's flex may vary. One company's stiff flex could be another company's regular flex and vice versa. Shaft frequency can be affected by club length, grip size, head weight and hosel type. Here at Kepler's we take all these factors in when we match your swing and clubs to the proper frequency.

Putter Fittings

This is the fastest way to reduce strokes in your game, get your putter fit to your size and stroke. Most golfers’ putters have never been fit and this is costing them strokes.
 
Our fitting Process:

  1. Interview the customer regarding their putting issues(long or short, left or right, etc.), existing putter, physical abilities/disabilities and putting stroke/stance preference
  2. Evaluate putter loft and lie with Mitchell putter fitting gauge; and evaluate customers stance and hand position on the grip to help determine shaft length and grip size
  3. Evaluate customer’s putter and putting stoke on the SAM PUTT Lab system.
  4. Information gathered from SAM PUTT Lab enables us to match the precise putter head design and specifications with the customer’s putting stroke.
  5. Information gathered in the steps above will help us match the proper putter with the customer’s needs. We can adjust your current putter to the improved specifications from the fitting process. Kepler’s Golf also offers a wide range of putters with new technology from the leading companies in the industry -Taylor Made, Ping, Odyssey, Cleveland, Bettinardi, Scotty Cameron, Bobby Grace, Toulon, Seemore and More! What ever choice you make the data from the fitting will improve your roll and consistency on the greens.

 
Call Kepler’s Golf at 925-932-8179 to set up a putter fitting and start lowering your score.  

Sam Putt Lab

SAM PuttLab is an analysis and training system based on an accurate ultrasound measurements. It analyzes the 28 most important parameters of your putting stroke and displays the results in easy to understand graphic reports. Discover your individual strengths and weaknesses for a better and more efficient training.

Within seconds the system gives you an individual feedback on your putting strokes. The analysis reveals even the smallest details of your movements and allows you to develop improvements and training strategies. SAM PuttLab utilizes ultrasound sensory analysis and therefore is far more precise than any other similar system on the market.
Go to Sam PuttLab.